Table of Contents
Advertisement
Editing Features
Using the HS-U577 to playback to another VCR
1
Connect one stereo audio cable to AUDIO
IN L and R on the recording VCR, and to
AUDIO OUT L and R on the HS-U577.
2
Connect a yellow video cable to VIDEO IN
on the recording VCR and to VIDEO OUT
on the HS-U577.
3
Set the audio monitor on the HS-U577 to
Stereo. If the other VCR is a mono VCR,
set the audio monitor on the HS-U577 to
Mono. See Selecting and adjusting the
audio and video functions on page 27.
HS-U577
PLAYBACK
AUDIO OUT R
AUDIO OUT L
38
AUDIO
OUT
R
L
VIDEO
OUT
R
L
VIDEO OUT
4
Set the input of the recording VCR to
External.
5
Put a blank tape into the recording VCR.
6
Put the tape you want to copy into the
HS-U577 and find the cue point.
7
On the recording VCR, press REC, then
PAUSE.
8
On the HS-U577, press PLAY, then PAUSE.
9
Press the PAUSE buttons on both VCRs at
the same time to begin copying the tape.
10 Press STOP on both VCRs when you are
finished.
RECORDING
VIDEO IN
AUDIO IN R
L
R
AUDIO IN L
Advertisement
Table of Contents
