Table of Contents
Advertisement
Timer Recording
Program skip using the POWER button
If you have entered only one program into your VCR's memory,
you can skip the program without going into the VCR's menus.
Simply press POWER on the front panel once. The programmed
recording light will turn off, and the program will be skipped. If you
decide not to skip the program, press POWER on the front panel
twice; the programmed recording light will light up again.
Changing timer recording settings
1
Press MENU on the remote control. Your VCR will turn on and
VCR Main Menu will appear. Press the ADJUST buttons to
select Program to record. Press ENTER.
2
Recap screen will display for 4 seconds. While this screen is
displayed, press the ADJUST buttons to place the cursor arrow
next to the program you wish to change. Press ENTER. You
will see the Program to record setting menu.
3
Press ENTER repeatedly to select the item you wish to
change. Use the ADJUST buttons to change it. Then press
ENTER repeatedly to return the altered program to the Recap
screen.
4
Press MENU twice to turn off the menus. Then press POWER
to turn off the VCR. Make sure the programmed recording light
is on.
Canceling a timer recording before the recording starts
1
Press MENU on the remote control. Your VCR will turn on and
VCR Main Menu will appear on your screen. Use the ADJUST
buttons on the remote control to select Program to record.
Press ENTER.
2
Recap screen will display for 4 seconds. While this screen is
displayed, press the ADJUST buttons to place the cursor next
to the program you wish to cancel.
3
Press CANCEL. The program is erased.
4
Press MENU twice to turn off the menus.
Using a satellite receiver
If you are using a Panasonic, RCA, Sony, Toshiba, or Hughes
satellite receiver, your VCR will turn the receiver on when a timer
recording begins and off when the recording ends.
However, if you are using a PRIMESTAR
receiver, you will have to turn the receiver on before a timer
recording begins.
Before turning off the VCR, to put your VCR in stand-by for
recording, make sure that your satellite receiver's menu turns off.
®
™
or DISH Network
Recap screen
¬Program to record
CH DAY
ON
§
2 MO12 11:30am
--- --
--:--
--- --
--:--
--- --
--:--
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
ƒChannel
ƒDay
ƒStart time
ƒStop
time
ƒRecord speed
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
Recap screen
¬Program to record
CH DAY
ON
§
2 MO12 11:30am
--- --
--:--
--- --
--:--
--- --
--:--
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
OFF
1:30pm SP
--:--
SP
--:--
SP
--:--
SP
2
Monday 12
11:00am
1:30pm
EP
OFF
1:30pm SP
--:--
SP
--:--
SP
--:--
SP
35
Advertisement
Table of Contents
