Sunny SF-B1203 Manual
Indoor cycling exercise bike
Hide thumbs
Also See for SF-B1203:
- Instruction manual (14 pages) ,
- Manual (16 pages) ,
- User manual (11 pages)
Subscribe to Our Youtube Channel
Related Manuals for Sunny SF-B1203
Summary of Contents for Sunny SF-B1203
- Page 1 Indoor Cycling Exercise Bike Model No. P8100 & SF-B1203 IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE. For Customer Service, please contact: support@sunnyhealthfitness.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. -
Page 3: Exploded View
EXPLODED VIEW... -
Page 4: Parts List
PARTS LIST Description Qty. Description Qty. Spring Φ 1*Φ 11*57*N11 Main frame Rear stabilizer Washer d6*Φ 16*1.2 Foot pad Φ 43*14*M8*25 Nylon nut M6*H6*S10 Nut M8*H5.5*S1 Bolt M6*10*S10 End cap PT60*30*20 Washer d6*Φ 12*1.2 Screw M8*40*20*S6 Brake Spring pad Washer d8*Φ16*1.5 Screw M5*30*Φ... -
Page 5: Hardware Package
HARDWARE PACKAGE... - Page 6 ASSEMBLY INSTRUCTIONS STEP 1: Fix the Front stabilizer (8) and the Rear stabilizer (2) onto the Main frame (1) with Screws (6) and Washers (7).
- Page 7 STEP 2: A. Push the Brake handle (23) into the Main frame (1) down slowly and then fix it with the Screw (39) and Washer (36). B. Lock the Pedal (12L/R) on the *left and right crank of the Main frame (1).
- Page 8 STEP 3: A. Fix the Saddle (22) onto the Saddle tube (21) with Washers (19) and Nylon nuts (18). B. Insert the Saddle post (15) into the Main frame (1), and then lock it with the Knob (13). C. Put the Saddle tube (21) on the Saddle post (15), and then tighten it using the Knob (16) and Washer (17).
- Page 9 STEP 4： A. Connect the Lower sensor wire (48) with the Upper sensor wire (46), then push the connected sensor wire back into the tube of Main frame (1). B. Fix the Front post (42) on the Main frame (1) with Arc washers (41), Washers (7) and Screws (40).
- Page 10 STEP 5： A. Assemble the Handlebar (44) on the Front post (42), and fix it with Screws (40), Spring washers (45) and Washers (7). B. Insert the Computer (50) onto the support of the Handlebar (44) and then connect the Sensor wire (46) to the Computer (50). Assembly is now complete.
- Page 11 Notice: Push down the knob to enforce brake, and stop the bike immediately. Rotate the knob clockwise to increase the resistance. Rotate the knob counter- clockwise to decrease the resistance.
-
Page 12: Usage And Maintenance
USAGE AND MAINTENANCE 1. If there is no signal coming to the computer, please check if the sensor wires (46&48) are connected correctly. 2. If the display becomes blurry, please replace the batteries to improve the result. 3. This bike can be leveled to compensate for uneven surfaces. To level the bike, please raise or lower the foot pads, which are located on the bottom of the front and rear stabilizers. -
Page 13: Exercise Computer
EXERCISE COMPUTER SPECIFICATIONS: TIME -------------------------------------------------------00:00 -- 99:59 MIN: SEC SPEED ----------------------------------------------------0.0 – 999.9 KM/H OR ML/H DISTANCE -----------------------------------------------0.00 – 99.99 KM OR ML CALORIES -----------------------------------------------0.0 – 999.9 KCAL KEY FUNCTIONS: MODE: Press to select function. (Time, Speed, Distance, Calories). -Press and hold the mode button for three seconds to reset time, distance and calories. OPERATION PROCEDURES: 1.
Need help?
Do you have a question about the SF-B1203 and is the answer not in the manual?
Questions and answers