Table of Contents
Advertisement
Technical Data
Zone Control 369e Six Zones
Literature
— D 369e, U 369e, D 070e.
Control
— Microprocessor PID control; This is not a safety (limit) control.
Packaged weight
— 3.5 lb. (1610 g), Enclosure A, blue PVC plastic
Dimensions
— 6-5/8" H x 7-9/16" W x 2-13/16" D (170 x 193 x 72 mm)
Approvals
— CE approved,, meets ICES & FCC regulations for EMI/RFI.
Ambient conditions
— Indoor use only, 32 to 122°F (0 to 50°C), < 90% RH non-
condensing, Altitude <2000 m, Installation Category II, Pollution
Category II.
Power supply
— 230 V ±10% 50/60 Hz 1200 VA
Cooling Relay
— 230 V (ac) 5 A 1/4 hp, pilot duty 240 VA
System Pump Relay
— 230 V (ac) 5 A 1/4 hp, pilot duty 240 VA
Zn 1 Relay
— 230 V (ac) 10 A 1/3 hp, pilot duty 240 VA
Zn 2 Relay
— 230 V (ac) 10 A 1/3 hp, pilot duty 240 VA
Zn 3 Relay
— 230 V (ac) 10 A 1/3 hp, pilot duty 240 VA
Zn 4 Relay
— 230 V (ac) 10 A 1/3 hp, pilot duty 240 VA
Zn 5 Relay
— 230 V (ac) 10 A 1/3 hp, pilot duty 240 VA
Zn 6 Relay
— 230 V (ac) 10 A 1/3 hp, pilot duty 240 VA
Sensors included
— NTC thermistor, 10 kΩ @ 25°C (±0.2°C) ß=3892
Outdoor Sensor 070e
Optional devices
— kanmor type #: 032e, 040e, 062e, 063e, 076e, 369e.
Caution The nonmetallic enclosure does not provide grounding between conduit connections. Use grounding type bushings and
jumper wires.
Limited Warranty and Product Return Procedure
Limited Warranty The liability of kanmor Control Systems Ltd.
("kanmor") under this warranty is limited. The Purchaser, by taking
receipt of any kanmor product ("Product"), acknowledges the terms
of the Limited Warranty in effect at the time of such Product sale and
acknowledges that it has read and understands same.
The kanmor Limited Warranty to the Purchaser on the Products sold
hereunder is a manufacturer's pass-through warranty which the Purchaser
is authorized to pass through to its customers. Under the Limited Warranty,
each kanmor Product is warranted against defects in workmanship and
materials if the Product is installed and used in compliance with kanmor's
instructions, ordinary wear and tear excepted. The pass-through warranty
period is for a period of twenty-four (24) months from the production date
if the Product is not installed during that period, or twelve (12) months from
the documented date of installation if installed within twenty-four (24) months
from the production date.
The liability of kanmor under the Limited Warranty shall be limited to, at
kanmor's sole discretion: the cost of parts and labor provided by kanmor to
repair defects in materials and/or workmanship of the defective product; or
to the exchange of the defective product for a warranty replacement product;
or to the granting of credit limited to the original cost of the defective product,
and such repair, exchange or credit shall be the sole remedy available
from kanmor, and, without limiting the foregoing in any way, kanmor is not
responsible, in contract, tort or strict product liability, for any other losses,
costs, expenses, inconveniences, or damages, whether direct, indirect,
special, secondary, incidental or consequential, arising from ownership or
use of the product, or from defects in workmanship or materials, including
any liability for fundamental breach of contract.
The pass-through Limited Warranty applies only to those defective Products
returned to kanmor during the warranty period. This Limited Warranty does not
cover the cost of the parts or labor to remove or transport the defective Product,
or to reinstall the repaired or replacement Product, all such costs and expenses
being subject to Purchaser's agreement and warranty with its customers.
Any representations or warranties about the Products made by Purchaser
to its customers which are different from or in excess of the kanmor Limited
kanmor Control Systems Ltd.
5100 Silver Star Road
Vernon, B.C. CANADA V1B 3K4
250-545-2693 Fax. 250-549-4349
Web Site: www.kanmor.com
© 2003 by tekmar Control Systems Ltd. Used with permission.
kanmor trademark is used under license.
Menu
Item
Zone Control 369e
Six Zones
Do not apply power
1
2
3 4 5
6 7 8 9 10 11 12 13 14 15 16
UnO
Zo
Zo Com Out
Zn Com Zn
Sw
In
Out
1
1-2
Warranty are the Purchaser's sole responsibility and obligation. Purchaser
shall indemnify and hold kanmor harmless from and against any and all
claims, liabilities and damages of any kind or nature which arise out of or
are related to any such representations or warranties by Purchaser to its
customers.
The pass-through Limited Warranty does not apply if the returned Product
has been damaged by negligence by persons other than kanmor, accident,
fi re, Act of God, abuse or misuse; or has been damaged by modifi cations,
alterations or attachments made subsequent to purchase which have not
been authorized by kanmor; or if the Product was not installed in compliance
with kanmor's instructions and/or the local codes and ordinances; or if due
to defective installation of the Product; or if the Product was not used in
compliance with kanmor's instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO
CONTRACTUALLY EXCLUDE, INCLUDING, WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, DURABILITY OR DESCRIPTION OF THE
PRODUCT, ITS NON-INFRINGEMENT OF ANY RELEVANT PATENTS
OR TRADEMARKS, AND ITS COMPLIANCE WITH OR NON-VIOLATION
OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR SAFETY
LEGISLATION; THE TERM OF ANY OTHER WARRANTY NOT HEREBY
CONTRACTUALLY EXCLUDED IS LIMITED SUCH THAT IT SHALL
NOT EXTEND BEYOND TWENTY-FOUR (24) MONTHS FROM THE
PRODUCTION DATE, TO THE EXTENT THAT SUCH LIMITATION IS
ALLOWED BY THE GOVERNING LAW.
Product Warranty Return Procedure All Products that are believed to have
defects in workmanship or materials must be returned, together with a written
description of the defect, to kanmor through its Representative. If kanmor
receives an inquiry from someone other than a kanmor Representative,
including an inquiry from Purchaser (if not a kanmor Representative) or
Purchaser's customers, regarding a potential warranty claim, kanmor's sole
obligation shall be to provide the address and other contact information
regarding the appropriate Representative.
All specifications are subject to change without notice.
32 of 32
Setback
None
INSTALLATION CATEGORY II
Made in Canada
230 V ±10% 50/60 Hz 1200 VA
Power
Relays
230 V (ac) 5 A 1/4 hp, pilot duty 240 VA
Signal wiring must be rated at least 300 V.
Do not apply power
17 18
19
20 21 22 23 24 25 26 27
Zn Com Zn
Zn Com Zn
Cooling
Sys
Power
Com tN1 tN1 Indr Com tN1 tN1 Indr Com tN1/2 tN1 Indr
2
3
3-4
4
5
5-6
6
Pmp
L
N
1
2
2
3
Printed in Canada. D 369e - 06/03.
Test
28
29
30 31
4
4
5
6
6
Advertisement
Table of Contents
