Kanmor Zone Control 369e Manual page 3

MENU FIELD
The 369e has a number of menus used to monitor system status and adjust settings in the control. The current menu will be
displayed in the left hand side of the display.
View Menu
The View menu is used to view the outdoor temperature and zone temperatures.
Adjust Menu
There are seven separate menus used to make adjustments to the control settings
and the zone settings. There is an Adjust menu for the control, and an Adjust menu
for each zone.
Control Adjust Menu
The Control Adjust menu is used to make adjustments to the control settings.
The control settings affect every zone. To access the control settings, select the
Adjust menu by using the Menu button. Adjust will be displayed in the left hand
side of the display.
Zone Adjust Menu
The Zone Adjust menu is used to make adjustments to the zone settings. There
is a Zone Adjust menu for each zone that an RTU or indoor sensor is connected
to. To access the zone settings for a particular zone, select the Zone Adjust menu
for that zone by using the Menu button. Adjust will be displayed in the left hand
side of the display, and Zone followed by the zone number will be displayed in the
bottom of the display.
Note: The Zone Adjust menu in the control is different than the Adjust menu in a
display RTU.
Monitor Menu
The Monitor menu is used to monitor the system over a period of time. It is possible
to track system pump and zone running hours, and high and low zone temperatures.
Time Menu
The Time menu is used for setback purposes, and displays the time of day and the
day of the week. In order to access the Time menu, the Setback / None DIP switch
must be in the Setback position. Refer to the Settings section on how to set the clock.
Schedule (Schd) Menu
The Schd menu is used to set the control schedules. In order to access the control
schedules in the Schd menu, the Setback / None DIP switch must be in the Setback
position. Schedule overrides are also available in the Schd menu. Refer to the Set-
tings section on how to set a schedule.
Miscellaneous (Misc) Menu
The Misc menu is used to select units, access levels, and backlite operation
3 of 32
View
°C
Adjust
Adjust
1
Zone
Monitor
°C
Time
AM
Schd
°C
Misc
© 2003 D 369e - 06/03