Table of Contents
Advertisement
How To Use The Data Brochure
This brochure is organized into four main sections. They are: 1) Sequence of Operation, 2) Installation, 3) Control Settings, and
4) Troubleshooting. The Sequence of Operation has four subsections. We recommend reading each subsection of the Sequence
of Operation, as each one contains important information on the overall operation of the control.
The Control Settings section (starting at the DIP Switch Settings) of this brochure describes the various items that are adjusted
and displayed by the control. The control functions of each adjustable item are described in the Sequence of Operation.
Table of Contents
User Interface..................................................Pg 2
Description of Display Elements ..................Pg 4
Sequence of Operation ..................................Pg 5
Section A: Heating.................................Pg 5
Section B: Cooling ................................Pg 7
Section C: Setback (UnOccupied).......Pg 9
Section D: tN 1 / 2 Devices ...................Pg 10
Installation.......................................................Pg 12
Electrical Connections..........................Pg 13
Testing The Wiring.................................Pg 15
DIP Switch Settings........................................Pg 17
Access Levels .................................................Pg 17
User Interface
The 369e uses a Liquid Crystal Display (LCD) as the method of supplying information. You can use the LCD in order to setup and
monitor the operation of your system. The 369e has four push buttons (Menu, Item, ▲, ▼) for selecting and adjusting settings. As
you program your control, record your settings in the Adjust Menu table which is found in the second half of this brochure.
Menu
All of the items displayed by the control are organized into various menus. These
menus are listed on the left hand side of the display (Menu Field). To select a menu,
use the Menu button. By pressing and releasing the Menu button, the display will
advance to the next available menu. Once a menu is selected, there will be a group
of items that can be viewed within that menu.
Item
The abbreviated name of the selected item will be displayed in the item field of the
display. To view the next available item, press and release the Item button. Once
you have reached the last available item in a menu, pressing and releasing the Item
button will return the display to the first item in the selected menu.
Adjust
To make an adjustment to a setting in the control, begin by selecting the appropriate
menu using the Menu button. Then select the desired item using the Item button.
Finally, use the ▲ and / or ▼ button to make the adjustment.
Additional information can be gained by observing the Status field of the LCD. The status field will indicate which of the control's
outputs are currently active. Most symbols in the status field are only visible when the View Menu is selected.
© 2003
D 369e - 06/03
Control Settings..............................................Pg 18
View Menu ..............................................Pg 18
Adjust Menu ...........................................Pg 18
Monitor Menu .........................................Pg 20
Time Menu ..............................................Pg 21
Schedule Menu ......................................Pg 22
Miscellaneous Menu .............................Pg 23
RTU Menu ...............................................Pg 23
Testing and Troubleshooting ........................Pg 27
Error Messages......................................Pg 29
Technical Data ................................................Pg 32
Limited Warranty ............................................Pg 32
2 of 32
Menu
Item
Menu
Item
Menu
Item
Advertisement
Table of Contents
