TSC Printronix MH261T Series User Manual page 41

Item
Density Set the printing darkness. Available setting range: 0 to 30.
Set the print speed. Available setting range is 2~18 for 203dpi and 2~14 for 300dpi;
Print Speed
1.5~6 for 300dpi..
Slew Speed Set feed speed
Back Speed Set back speed
Tear Off Adjust media stop location. Available setting value range: -120~120 dots.
Set the print mode. There are 4 modes:
Tear Off: Next label top of form is aligned to the print head heating line location.
Peeler Off: Enable the label peel off mode.
Print mode
Cutter: Enable the label cutter mode
Rewind: Enable the label rewind mode
Applicator: The printer prints a label when it receives a signal from the applicator.
Print Width Set the print width. Available setting range: 2 ~ 999 dots.
List Fonts Print the current fonts list from the memory devices to the label.
List Images Print current printer available images list stored at the memory device to the label.
List Formats Print current printer available formats list from the memory devices to the label.
List Setup Print current printer configuration to the label.
Control Prefix Set control prefix character.
Format Prefix Set format prefix character.
Delimiter Char Set delimiter character.
Description Default
16
203 dpi: 6
300 dpi: 4
203 dpi: 6
300 dpi: 4
2
0 dot
Tear Off
812
N/A
N/A
N/A
N/A
7E(~)
5E(^)
2C(,) 36