Thunderbolt Connection; Logic Pro X Setup - Focusrite Red 8Line User Manual

Thunderbolt Connection

Confirm that your unit's Host setting is set to 'Thunderbolt', see Global Host
Settings on page 23.
Two Thunderbolt 2 or Thunderbolt 3 connectors are located on the rear
panel. Connect to the host, or into a chain, using standard Thunderbolt 2
or Thunderbolt 3 cables (one supplied).
See appendix 3, pages 32–43 for the channel I/O allocation tables.

Logic Pro X Setup

• From the menu bar, go to: Logic Pro X > Preferences > Audio...
• Under the Devices tab, set: Input Devices and Output Devices to 'Focusrite Thunderbolt'
20
Thunderbolt 2
Thunderbolt 3