Focusrite Red 8Line User Manual page 26

Tools Menu . . .
Clock Source
• Internal
• S/PDIF
• ADAT 1
• ADAT 2
Preferred Master – On/Off state.
Post-Fader Metering (Software)– On/Off state. When enabled, the Red device will change all of its
metering from Pre-Fader Metering to Post-Fader Metering in the software only.
Metering Refresh Rate
• High
• Standard
Standard is recommended to lower CPU usage.
Input/Output Line Level Setup (Red 8Line and Red 16Line only)
• All: +18dBu / +24dBu
• Ch.1: +18dBu / +24dBu
• Ch.2: +18dBu / +24dBu
• Ch. 16: +18dBu / +24dBu
iOS Page:
Shows the list of iOS devices able to access
the unit.
Each device can have its control access
approved or be removed from the list.
The Red devices are controlled from the
Focusrite Control iOS app.
• Word Clock
• Dante
• Loop Sync
26