Red 16Line; Level Meters 1-8 And 9-16; Output Meter; Meter Source Selection - Focusrite Red 8Line User Manual

LCD Meter Displays . . .

Red 16Line

Level Meters 1–8 and 9–16
The left and centre LCD screens can both display level meters.
These indicate the internal signal level of channels 1–16, after A-D
conversion (or pre D-A conversion when monitoring outputs), with
0 dBFS being at full scale.
A red clip indicator is displayed on channels that reach clipping
point.
Pressing the METER button toggles the displays between preamp-info and
meter-level displays.
The meter source is selected as follows:
• Press the Input button to display input channels 1–8 and 9–16.
• Press the Output button to display output channels 1–8 and
9–16.
• Press both Input and Output buttons simultaneously to select
the combined I/O view.

Output Meter

The Output screen normally shows the Monitor or Headphone 1 or 2
level meters (as well as the interface status flags).
This screen is also used to select the meter source for displays 1
and 2.

Meter Source Selection

To select the signal source for the Left and Centre LCD displays:
Press the Meter button on the front panel twice to access the
1
Meter Source-List
Use the Output Encoder to scroll to the required input
2
Click the Output Encoder to make the selection
3
Press Monitor or one of the Headphone buttons to exit
4
18
Analogue In
I 2 3 4 5 6 7
0
-6
-60
In
I 2 3 4 5 6 7
Out
Combined I/O Display
Thunderbolt
Internal
L R
Headphone 1
-60
Mute
Dim
Analogue Inputs
1-8
Analogue Inputs Analogue Inputs
9-16 [9-16]
Analogue Outputs
1-8
Analogue Outputs
9-16
S/PDIF Inputs
1-2
S/PDIF Outputs
1-2
ADAT Inputs
1-8
Meter Source List
8
8