Table of Contents
Advertisement
3.2 Accessing the System
The CSE-219U chassis features a removable top cover that allows access to components.
Check that all ventilation openings in the chassis are clear and unobstructed.
Removing the Top Cover
1. Remove the two screws on the side of the chassis that secures the cover to the chassis
2. Press the two release buttons and slide the cover toward the rear.
3. Lift the top cover up.
Caution: Except for short periods of time, do not operate the server without the cover in place.
The chassis cover must be in place to allow for proper airflow and to prevent overheating.
1
2
Remove Screw
Chapter 3: Maintenance and Component Installation
2
Figure 3-1. Removing the Chassis Cover
27
1
Remove Screw
Advertisement
Table of Contents
