Table of Contents
Advertisement
Figure 16. Fitting the rear ceramic support.
10. Fit the two surround securing brackets to
the convection box side flanges with the
screws supplied. Note the different orientation
of the brackets at left and right sides (See
figure 17)
9.1 Method 1 - Front fixing to fireplace surround.
1. Make sure that the fireplace front surround area is sound enough to take the fibre
plugs and woodscrews. If necessary, make sound with a suitable cement.
2. Place the hotbox centrally in the fireplace in the position in which it is to be
permanently installed. If a concealed connection is being used, insert the hotbox into the
fireplace feeding the supply pipe through the pierced hole in the rear grommet.
3. Mark the fireplace front surround through the four fixing holes in the side flanges of
the hotbox (See figure 18).
INSTALLER GUIDE
9. HOTBOX INSTALLATION
Page 18
Figure 15. Fitting the foam seal
LEFT
Figure 17. Surround securing
brackets
RIGHT
Advertisement
Table of Contents
