®
Thermalert
4.0 Series
Users Manual, Rev. 2.4, Jul 2021
11 HART Communication
2-wire sensing heads with HART communication transmit information in two directions. On the one hand, the
sensing head provides analog measured values to the control room via the 4 to 20 mA current loop. On the other
hand, the sensing head can be reprogrammed from the control room by means of bi-directional transmission of
digital signals. The superposition of analog and digital signals is described by the HART protocol. Sensors which
are programmable in this way are called HART sensors.
The manufacturer recommends using the following HART/USB adapter:
•
74
1.800.561.8187
Figure 11-1: Typical Installation with HART Adapter
Sensor
Company ProComSol, model HM-USB-ISO
www.
information@itm.com
.com
HART Adapter
Computer
Interface