ELNA 202-238-001 Quick Start Manual

PIN TUCKING CORD GUIDE
For Easy Set Bobbin models
Ref: 202-238-001
Compatibles models: 920 - 860 - 780 - 760PRO -
730PRO - 680 - 580
Use this set together with the pintucking foot and
twin needle to create corded pintucks.
CAUTION
• Make sure to press the Lockout key when
attaching / detaching the needle plate / foot and
insering the bobbin.
• For models without the Lockout key, turn the
power swich off when attaching / detaching the
needle plate / foot insering the bobbin.
• Please refer to your machine's instruction
manual for accessory attachment and removal
CONTENENTS:
A: Pintucking Cord Guide (narrow) for cords less
than 1.5 mm in diameter use with the pintucking foot
(narrow).
(9mm Ref.: 202-094-209)
B: Pintucking Cord Guide (wide) for cords 1.5 - 2.0
mm in diameter use with the pintucking foot (wide).
(9mm Ref.: 202-093-208)

TO ATTACh:

1. Remove the hook cover plate and attach the
cord guide (refer to the instruction manual of
your machine).
2. Pass the cord through the cord guide as
illustrated and pull 10 cm of the cord to the rear.
3. Replace the needle with a twin needle and attach
an appropriate pintucking foot. Sew over the
cord folowing the pintucking foot instructions.