Requirements For Operating - DELTA LOGIC ACCON-NetLink-USB compact User Manual

5

REQUIREMENTS FOR OPERATING

Hardware requirements
Siemens S7-200-, S7-300 and S7-400 automation devices or compatible
to S7. The used PCs must have a working USB interface. You can also
use standard USB cards which support both Highspeed 480 Mbps and
Fullspeed 12 Mbps. But to achieve a good performance you should use
USB 2.0 interfaces.
Software requirements
To use the ACCON-S7-NET drivers you need a PC including Windows XP,
2003R2, 7, 2008R2, 8.1, 2012R2, 10. On this PC the SIMATIC Device
Drivers (PG/PC-Interface) have to be installed. The SIMATIC Device
Drivers will be installed with e. g. STEP 7, STEP 7 lite or STEP 7-
Micro/Win. By installing ACCON-S7-NET more interfaces will be added
to the PG/PC-Interface.
Assembly
Installation and assembly have to be carried out according to VDE 0100
/ IEC 364. As the ACCON-NetLink-USB compact is an IP30 module it has
to be built into a switchboard.
For secure operating please keep the maximum environmental
temperature of 60 °C in mind.
ACCON-NetLink-USB compact 7