DELTA LOGIC ACCON-NetLink-USB compact User Manual page 12

To ease the configuration it is possible to activate the function
»Automatic reconnaissance of the net-related parameters activated«.
Thus the ACCON-NetLink-USB compact gets the bus parameters
independently. So the ACCON-NetLink-USB compact can be used with
different automation systems without changing the bus settings.
The automatic reconnaissance of the net-related parameters cannot be
used when the function »Cyclic distribution of the bus parameters« is
not activated respectively not supported in the used PLC, e. g.:
- using S7-200
- older Siemens S7 CPUs
- if the ACCON-NetLink-USB compact is the only master at the bus
When using the autobaud function the initialization lasts a bit longer
because the online parameters have to be determined. It is possible
that the autobaud function does not work correctly at slower
transmission rates (e. g. 19.2 Kbps) or global data communication.
ACCON-NetLink-USB compact 11