DELTA LOGIC ACCON-NetLink-USB compact User Manual page 24

Supported software
Table 3: Technical Data
Pin assignment
Assignment of the MPI/PROFIBUS interface
Pin Signal
1 -
2 GND
3 RxD / TxD-P
4 -
5 DGND
6 DVCC
7 VCC
8 RxD / TxD-N
9 -
Table 4: Pin assignment MPI/PROFIBUS
ACCON-NetLink-USB compact
ACCON-S7-EasyLog, ACCON-
AGLink, DELTA LOGIC S7/S5-
OPC-Server. With the driver for
SIMATIC ACCON-S7-NET the
following software can be used;
SIMATIC Manager from V5.3,
WinCC, WinCC flexible, ProTool,
STEP7-Micro/WIN, TIA Portal
Meaning
Not used
Ground/ voltage supply (looped-through)
Received/transmission data-P
Not used
Ground for bus termination (looped-
through)
5 VDC for bus termination (looped-
through)
24 VDC power supply (looped-through)
Received/transmission data -N
Not used
23