DELTA LOGIC ACCON-NetLink-USB compact User Manual page 13

PROFIBUS communication
The PROFIBUS configuration is the same as the MPI configuration. Only
the net-related parameters are wider. With PROFIBUS the additional
settings for bus profile and bus parameters are available:
Figure 4: Automatic bus profile detection deactivated
Profile:
Under PROFIBUS there are the profiles »DP«, »Standard« and »User-
defined«. You have to select the profile which is already used in the
automation system.
Bus parameters:
Unlike to MPI the bus parameters under PROFIBUS are not constant
and change in relation to the number and type of the used PROFIBUS
stations.
You should always use the PROFIBUS parameters which are set in the
actual automation system (look for the STEP7 project).
ACCON-NetLink-USB compact 12