Care And Cleaning; Supplies; Interior And Exterior Surfaces; Accessing Care And Cleaning - Bunn Fast Cup Installation & Operating Manual

Bean-to-cup single serve brewer
Table of Contents

Advertisement

Supplies

Cleaning supplies included with machine:
Brush (PN 47745.0000) and Microfiber Cloth
(PN 53465.0000) for touchscreen cleaning,
Cleaning Tube (PN 48236.1001) and
Tabz™ coffee equipment cleaning tablets.
(120 tablets, PN 39637.0000)
General
The use of a damp cloth rinsed in any mild,
non-abrasive, liquid detergent is recommended for
cleaning all surfaces on Bunn-O-Matic equipment.

Interior and Exterior Surfaces

Do not use any abrasive materials.
Use a soft, dry cloth to wipe down the exterior
surfaces of the dispenser to maintain the luster
of the stainless steel finish.
Wash the stainless steel interior surfaces of
the dispenser with warm, soapy water. Rinse
with warm, clear water. If the water is hard,
wipe the dispenser dry with a soft cloth to
prevent spotting.
Use cleaning cloth provided, to clean the
acrylic door panel.

Accessing Care and Cleaning

1. Touch and hold the BUNN logo for a
few seconds until the SERVICE ACCESS
screen appears.
2. From the SERVICE ACCESS screen, press
the CARE AND CLEANING button.

CARE AND CLEANING

40
1
2

Advertisement

Table of Contents
loading

Table of Contents