Using Multi-Handset Features - Uniden XDECT SSE47 Series Owner's Manual

Using Multi-Handset Features

# To use the features in this section, you need at least 1 cordless handset.
Expanding Your Phone
• Your base supports a total of 6 cordless handsets, including any that came with
your phone.
• You must register accessory handsets to the base before using them. Handsets
that aren't registered display a "not registered" message. For registration
instructions, see page 39 or the accessory handset manual.
Using Conference Calling
• When an outside call comes in, the base and two cordless handsets can join in a
conference call with the outside caller.
• To join the call, just pick up the corded handset from the base or press TALK/FLASH
on a cordless handset. To leave the conference call, hang up normally; the other
station remains connected to the call.
Using Privacy Mode
• To activate Privacy Mode on a call in progress, select Call Privacy from the menus.
As long as privacy mode is on, no other handsets can join your call.
• Privacy Mode turns off automatically when you hang up or put the call on hold.
• To use privacy mode during a conference call, wait until all stations have joined the
call before turning on Privacy Mode. If a handset disconnects, that handset cannot
rejoin the call as long as Privacy Mode remains on.
Call Transfer
To...
transfer a call
cancel a transfer
accept a transferred call
From the Base
1. Select Hold/Transfer from the menus.
2. The system puts the call on hold. Select the
handset you want to page, or
handsets.
When the other handset accepts the call, you'll be
disconnected, but you can join the call again.
Quickly press and
release the hook
switch.
To answer the
page and speak
to the transferring
handest, pick up
the corded handset.
From a cordless Handset
All to page all
Press TALK/FLASH to return to
call.
TALK/FLASH to answer the
page and speak to the other
handset. Then press TALK/
FLASH to speak to the caller.
29