Using Multi-Handset Features; Expanding Your Phone; Using Privacy Mode - Uniden XDECT SSE37 Series Owner's Manual

using Multi-handset Features

# To use the features in this section, you need at least 1 cordless handsets.

expanding your phone

• Your base supports a total of 6 cordless handsets, including any that came with your
phone.
• You must register accessory handsets to the base before using them. Handsets that
aren't registered display a "not registered" message. For registration instructions,
see page 35 or the accessory handset manual.
using Conference Calling
• When an outside call comes in, the base and two cordless handsets can join in a
conference call with the outside caller.
• To join the call, just pick up the corded handset from the base or press TALK/FLASH on
a cordless handset. To leave the conference call, hang up normally; the other station
remains connected to the call.

using privacy Mode

• To activate Privacy Mode on a call in progress, select
As long as privacy mode is on, no other handsets can join your call.
• Privacy Mode turns off automatically when you hang up or put the call on hold.
• To use privacy mode during a conference call, wait until all stations have joined the
call before turning on Privacy Mode. If a handset disconnects, that handset cannot
rejoin the call as long as Privacy Mode remains on.
26
Call Privacy from the menus.