Finding A Lost Handset; Using Voice Message Notification - Uniden XDECT SSE47 Series Owner's Manual

Intercom
• Whenever the phone is in standby, you can make an intercom call between
handsets without using the phone line.
• You can make an intercom call between BASE-HAND or HAND-HAND.
• If an outside call comes in during an intercom page, the phone cancels the page so
you can answer the incoming call.
• If an outside call comes in during an intercom call, press TALK/FLASH to hang up the
intercom call and answer the outside call.
To...
make an intercom page
cancel a page
answer an intercom page
leave an intercom call

Finding a Lost Handset

You can use the intercom page to find a lost handset. When the intercom tone sounds,
you can track the tone to the lost handset.

Using Voice Message Notification

If you subscribe to a voice mail service, your phone can notify you when you have
a new message. This feature supports Frequency-Shift Keying (FSK) notification.
The voice mail service provided by your service provider is independent from
the built-in answer machine of the SSE47. Contact your voice mail provider for
information.
• Depending on your telephone service provider, when you have new messages,
you may be alerted in the following ways:
- the display may show a message icon, (if your phone has an LCD display),
- the dial tone will sound different (you will hear an interrupted dial tone), and/or
- the charge LED on the cordless handset will flash (Flashing Message Indicator)
• After you listen to your messages, the message icon disappears, the dial tone
returns to normal, and/or the charge LED on the cordless handset stops flashing.
With the phone in standby, open the menu and select Advanced Setup; select VMWI
Reset, then select Yes.
30
From the base
3. Press INTERCOM/HOLD.
4. Select the station you want to talk with, or
all stations.
Press INTERCOM/HOLD.
Press INTERCOM/HOLD
or pick up the corded
handset.
Press INTERCOM/HOLD or
place the corded handset
in the cradle.
From a cordless handset
Select Intercom in the main
menu.
All
Press END/CLEAR.
Press TALK/FLASH.
Press END/CLEAR or place the
handset in the cradle.
to page