Connecting the AC adapter
To the base
To avoid risk of fire and shock, only use the Uniden AAD-041S(M) AC adapter with the base.
Connect the AC adapter to the
DC IN 9V jack on the bottom
of the base.
Route the cord
through the
molded wiring
channel.
To the charging cradle (for multi-handset packs only)
Use only the Uniden AAD-600S(M) AC adapter with the charging cradle.
Place the cord
through the molded
wiring channel.
DSS8955 OM.indb 7
Don't put any power cord where it people might trip
over it or step on it. If a power cord becomes chafed
or worn out, it can create a fire or electrical hazard.
7
Connect the AC
adapter to a
standard 240V
AC wall outlet.
Connect the AC
adapter to a
standard 240V
AC wall outlet.
28/7/08 5:20:41 PM