Date & Time Menu; Advanced Setup Menu - Uniden XDECT SSE47 Series Owner's Manual

Factory Reset
(Base Only)
Answering Setup Menu
Refer to page 32 for details on setting up your answering system.
Reminder Setup Menu
Refer to page 36 for details on setting up your reminder system.
Date & Time Menu
You need to set the clock so messages get the correct time stamp. Setting the date and
time on the base or any handset will set it on all handsets/bases.
When you select Date & Time, the system displays the date and time with the first digit
of the date flashing. Use the 0 - 9 keys to enter the date and time. When you enter a
number, the cursor moves to the next position. Press VOL UP to move to the the previous
position or VOL DOWN to accept the current entry and move to the next position. Press
MENU/OK to accept the date and time you just entered.

Advanced Setup Menu

The settings on this menu affect all the handsets and the base. Only one handset at a
time can change these settings.
Menu Option
Set Line Mode
VWMI Reset
Edit Voice Mail
Insert 0
Time Adjustment
Reset all data to factory settings.
(All stored data will be deleted in this case.)
What it does
Do not change this setting unless instructed to by customer
service.
Reset the Visual Message Waiting Indicator (see page 30).
Enter or edit your phone service provider's voice mail access
number (see page 15).
This feature adds "0" or "00" at the beginning of the number
received from Caller ID. The default setting for New Zealand is
On. The default setting for Australia is
Select Set by Caller ID to allow phone network to automatically
set cordless phone system time.
Off.
17