Table of Contents
Advertisement
38
www.aeg.com
11.2 How to clean: Cavity
embossment
Clean the cavity embossment to remove
limestone residue after cooking with
steam.
Pour: 250 ml of white vinegar
into the cavity embossment.
Use maximum 6% vinegar
without any additives.
For the function: True Fan Cooking PLUS clean the oven for every 5 - 10 cooking cycles.
11.3 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1
Step 2
Step 3
Step 4
11.4 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Step 1
Let the vinegar dissolve the
limestone residue at the am-
bient temperature for 30 mi-
nutes.
Turn off the oven and wait
until it is cold.
Pull the front of the shelf sup-
port away from the side wall.
Pull the rear end of the shelf
support away from the side
wall and remove it.
Install the shelf supports in
the opposite sequence.
The retaining pins on the
telescopic runners must point
to the front.
Before the catalytic cleaning
Step 1
Step 2
Clean the cavity with warm
water and a soft cloth.
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Step 2
Step 3
2
Step 3
Advertisement
Table of Contents
