Digital Watchdog Megapix DWC-MV72i28V Manual page 30

WEBVIEWER*
S e t u p > N e t w o r k > R T S P S e t t i n g s
U s e t h i s s e t u p m e n u t o c o n f i g u r e t h e c a m e r a ' s R T S P C o n n e c t i o n
i n f o r m a t i o n . T h e c a m e r a m u s t b e c o n n e c t e d t o a s e r v e r u s i n g t h e R T S P
U R L i n o r d e r f o r t h e s e s e t t i n g s t o a p p l y.
1. RTSP Session Time Out – Check the box to enable RTSP time out for each of the camera's
streams. When enabled, the RTSP connection will time out if a client become non-responsive
after the set dwell time. Set the dwell time from 30~120 seconds.
2. RTSP Setup – The RTSP's default port is 554. if needed, adjust the port.
3. All RTSP connections to the camera will be listed in the table at the bottom of the screen.
3 0