Bottom Components - Fujitsu S Series.book User Manual

Port Replicator
Connector
Memory Upgrade
Compartment
Lithium Ion
Battery Bay
Lock Button
Hard Disk Drive

BOTTOM COMPONENTS

Following is a brief description of your notebooks
bottom panel components.
Port Replicator Connector
This connector allows you to connect the Port Replicator
to your notebook. (Figure 2-9)
Memory Upgrade Compartment
Your notebook comes with high speed Synchronous
Dynamic RAM (SDRAM). The memory upgrade
compartment allows you to expand the system memory
capacity of your notebook, hence improving overall
performance. (Figure 2-9) (See Memory Upgrade Module
on page 57 for more information)
Lithium Ion Battery Bay Lock Button
Slide this lock button to lock/unlock the internal battery.
(Figure 2-9)
Figure 2-9 LifeBook S Series notebook bottom panel
G e t t i n g t o K n o w Y o u r L i f e B o o k
Lithium Ion Battery Bay Release Button
Slide the release button to release the internal battery.
(Figure 2-9)
Lithium Ion Battery Bay
The battery bay contains the internal Lithium Ion
battery. It can be opened for the removal of the battery
when stored over a long period of time or for swapping
a discharged battery with a charged Lithium Ion battery.
(Figure 2-9) (See Lithium Ion Battery on page 43 for more
information)
Main Unit and Configuration Label
The configuration label shows the model number and
other information about your notebook. In addition,
the configuration portion of the label has the serial
number and manufacturer information that you will
need to give your support representative. It identifies the
exact version of various components of your notebook.
(Figure 2-9)
Main Unit and
Configuration
Label
Lithium Ion
Battery Bay
Release Button
Lithium Ion
Battery Bay
15