Bottom Components - Fujitsu Lifebook P1510 User Manual

Speaker
Port Replicator
Connector
Air Vents
Battery
Pack
Latch
Lithium ion
Battery
Figure 2-5. LifeBook P Series notebook bottom panel

BOTTOM COMPONENTS

Following is a brief description of your
notebook's bottom panel
(Figure 2-5)
Lithium ion Battery Compartment
The battery compartment contains the
internal Lithium ion battery. The battery
should be removed when the computer is
stored over a long period of time or for
swapping a discharged battery with a
charged Lithium ion battery.
Port Replicator Connector
This connector allows you to connect the
optional port replicator.
Speaker
The speaker allows you to listen to sound
from your system.
Main Unit and Configuration Label
The configuration label shows the model
number and other information about your
LifeBook P Series notebook. In addition,
the configuration portion of the label has
the serial number
information that you will need to give your
support representative. It identifies the
exact version of various components of
your notebook.
components.
and manufacturer
Getting to Know Your Lifebook
Memory Upgrade Compartment
Your notebook comes with high speed
DDR2 Synchronous
(SDRAM). The memory
compartment allows you to expand the
system memory capacity of your notebook,
hence improving overall performance.
Air Vents
The air vents allow proper air circulation to
ensure that the notebook
overheat.
To protect your notebook from
damage and to optimize system
performance, be sure to keep
all air all vents unobstructed,
clean, and clear of debris.
This may require periodic
cleaning, depending upon the
environment in which the
system is used.
Do not operate the notebook in
areas where the air vents can
be obstructed, such as in tight
enclosures or on soft surfaces
like a bed or cushion.
Main Unit and
Configuration
Label (approximate
location)
Air Vents
Memory
Upgrade
Compartment
Battery
Pack
Latch
Dynamic RAM
upgrade
does not
13