Automatic Insertion Function - Fujitsu S Series.book User Manual

L i f e B o o k S S e r i e s – S e c t i o n F o u r
C A U T I O N
Many movies run-times are longer than your system
can support on a single battery. If you are watching a
DVD movie on battery power you may need to swap
in an additional, charged battery, add a 2nd modular
battery or attach AC power during the movie to view
it in its entirety.
P O I N T
An additional full-charged battery is highly
recommended if you will be watching DVD movies
on battery power. If you don't have an additional
battery, you may purchase one either on-line at
FPCDirect.fujitsu-pc.com or call 1-877-FPCDirect
(1-877-372-3473).
To Watch a Movie on Battery Power:
1. Have an additional full-charged battery or your
AC adapter ready for use.
2. Start watching your DVD movie.
3. When the low battery warning occurs, immediately
stop the movie and exit the DVD player.
C A U T I O N
If you do not stop the DVD player quickly and the
notebook attempts to auto-suspend (critical battery low
state) the notebook will shutdown improperly. If this
occurs, you will need to perform a hard reset and follow
the instruction, if any, presented to you before the
system will reboot.
4. Manually place your notebook into suspend mode
by depressing the Suspend button and replace the
discharged battery with an additional full-charged
battery. Or if you do not have an additional battery,
you may attach AC power as soon as you see the low
battery warning.
5. Resume your notebook by pressing the Suspend
button again. This step is not required if you
attached AC power without entering suspend mode.
6. Restart your DVD player, locate and skip to the
chapter of the movie you were last watching.
7. Continue watching your DVD movie.
54
P O I N T
Some shorter DVD movies may not require you to
swap batteries or attach AC power to complete them.
However, it is best to be prepared since actual battery life
while operating the DVD drive cannot be guaranteed.

AUTOMATIC INSERTION FUNCTION

The Automatic Insertion Function allows your notebook
to automatically start a DVD/CD as soon as it is inserted in
the DVD/CD-ROM drive and the tray is closed. Your note-
book will begin playing an audio DVD/CD or will start an
application if the DVD/CD includes an auto run file.
Disabling Automatic Insertion Function
To disable the Automatic Insertion function, follow
these easy steps:
1. Save all data and close all open applications.
2. From the Start menu, select Settings, and then
select Control Panel.
3. Double-click the System icon. This will open the
System Properties dialog box.
4. Select the Device Manager tab to display the device
lists for your notebook.
+
5. Click on the to the left of the DVD/CD-ROM
drive icon. The treeview will expand to show the
DVD/CD-ROM drive manufacturer's name and
model number.
6. Double-click on the DVD/CD-ROM drive manu-
facturer's name and model number. This will open
the DVD/CD-ROM drive manufacturer's name and
model number dialog box.
7. Select the Settings tab and then remove the check
mark in the Automatic Insertion Notification box
to turn it off.
8. Click OK.
9. Click Close in the System Properties dialog box,
then click Yes in the System Settings Change pop-up
window when it asks you to restart your machine
and activate this change.
The Automatic Insertion function can be re-activated by
repeating this process and placing a check mark in the
Automatic Insertion Notification box to turn it back on.