Cd-Rom Drive; Loading A Cd - Fujitsu S Series.book User Manual

CD Holder Tray
CD Eject Button
Tray Eject Button

CD-ROM Drive

Your Fujitsu LifeBook notebook contains a 24x max
CD-ROM player. This gives you access to both software
and audio CDs. (Figure 4-6)
C A U T I O N
Do not operate your CD-ROM drive unless your
notebook is sitting on a flat surface. Using a CD
when the drive is not level may damage the drive
or prevent proper operation.

LOADING A CD

To load a CD into your CD-ROM drive, follow these
easy steps:
1. Push and release the eject button on the front of the
CD-ROM drive to open the holder tray. The tray will
come out of the notebook a short distance.
2. Gently pull the tray out until a CD can easily be
placed in the tray.
C A U T I O N
There may be a protective sheet in the tray when it was
shipped, please make sure it is removed before operating.
Figure 4-6 CD-ROM Drive
3. Place the CD into the tray, label side up, with the
hole in the center of the CD. Snap the CD onto
the raised circle in the center of the tray.
4. Gently push the holder tray back in until you
hear a click. (Figure 4-7)
P O I N T
If you have disabled the Automatic Insertion Function,
you will have to start the CD from your desktop, as
your notebook will not automatically recognize that
a CD has been loaded.
U s e r I n s t a l l a b l e F e a t u r e s
Figure 4-7 Loading/Ejecting a CD
49