Advertisement

Star Trac E-SM Preventative Maintenance
PREVENTATIVE MAINTENANCE
With durable, high performance components, the Star Trac E-SM StairMill is designed for heavy usage
with minimal maintenance required. To keep your Stepper in top condition, Star Trac strongly recommends
performing the regular daily, weekly and monthly pre- ventive maintenance routines outlined below. Any
unusual symptoms, such as a loud continuous noise during operation, should be reported to STAR TRAC
PRODUCT SUPPORT DEPARTMENT at (800) 503-1221.

DAILY MAINTENANCE

Remove excessive accumulations of dust, dirt, and other substances by using a clean, soft cloth and a
non-abrasive liquid cleaner, such as Formula 409
display panel, hand rails, pedals, shrouds and heart rate grips.
NOTE: DO NOT spray the cleaner directly onto the Display Panel or heart rate grips.

WEEKLY MAINTENANCE

Perform the following services
each week:
Vacuum the floor under and around
the StairMill.
Inspect the Display Panel mounting screws for security, and
retighten if necessary.
Inspect
the
Display
keypads for wear.

MONTHLY MAINTENANCE

Perform the following services each month,
or as needed:
Check that the steps and shrouds
are secure.
Check the hand rails for looseness. Tighten screws
as necessary.
Check for smooth and quiet operation of all
moving parts.

MANAGER / MAINTENANCE MODE

After using your Star Trac E-SM StairMill for a period of time, you may wish to
change some of its settings.
Preventative Maintenance
E-SM
Panel
or FANTASTIK
. Wipe down the exterior of the
TM
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E-SM and is the answer not in the manual?

Questions and answers

Summary of Contents for Star Trac E-SM

  • Page 1 Check the hand rails for looseness. Tighten screws ■ as necessary. Check for smooth and quiet operation of all ■ moving parts. MANAGER / MAINTENANCE MODE After using your Star Trac E-SM StairMill for a period of time, you may wish to change some of its settings.
  • Page 2 Preventative Maintenance MANAGER MODE The Manager Mode lets you query and modify the basic settings of your StairMill. To enter Manager Mode: Press and hold the keys together. A beep will sound and “MANAGER MODE” will display momentarily in the Information Window. Release all keys.
  • Page 3 Your Service Representative may need to check accumulated data about the past usage of your Star Trac E-SM StairMill, test its display controls, or investigate error messages. For these reasons, your Stepper is equipped with a Maintenance Mode. The Maintenance Mode includes all of the items available through Manager Mode, plus additional items for Service and Diagnostic use.
  • Page 4 Preventative Maintenance The items that you may display and change with the previous keys are: Lowest Highest Default Item Value Value Value Meaning Serial No 65535 Serial number (set by factory) Date 01/00 12/99 01/05 Manufacture date for the StairMill (set by factory) Display Vers 1 01.00 99.99...
  • Page 5 Technician). TROUBLESHOOTING Star Trac E-SM StairMill perform a self-test at the beginning of every workout. If a problem is detected, a message displays before or after the workout, depending on the nature of the problem. Star Trac recommends that you refer your questions about your Star Trac E-SM StairMill operation and suspected malfunctions to Star Trac’s Service Hotline at (800) 503-1221.

Table of Contents