Star Trac E-TBT 9-6080 Quick Start Manual

Led display setting definitions

The display assembly contains two modes for settings.

Manager Mode

•

Maintenance Mode

•

In these modes, there are settings that can be changed for the club/facility or country for which the Total Body Trainer has

been installed. There are also technical settings which determine how the unit will perform.

Engaging Manager Mode

1. From the idle screen (powered on but not in a program), press and hold

2. A beep will sound and "MANAGER SETTINGS" will display in the information window.

3. Release all keys. "SERIAL NUMBER" will display in the information window.

1. From the idle screen (powered on but not in a program), press and hold

2. A beep will sound and "MAINTENANCE SETTINGS" will display in the information window.

3. Release all keys. "SERIAL NUMBER" will display in the information window.

STAR TRAC FITNESS

Setting Definitions

E-TBT, Model 9-6080, LED Display

1 of 3

Maintenance Mode

, then ,

, then

then

, then

637-1374 Rev: A

Table of Contents

Do you have a question about the E-TBT 9-6080 and is the answer not in the manual?

Page 1 1. From the idle screen (powered on but not in a program), press and hold , then , then 2. A beep will sound and “MAINTENANCE SETTINGS” will display in the information window. 3. Release all keys. “SERIAL NUMBER” will display in the information window. STAR TRAC FITNESS 1 of 3 637-1374 Rev: A...
Page 2 The default weight of a user when the ‘Quick Start’ program is used. This value is used in the WEIGHT calorie count algorithm. When UNITS=English the value reflects lbs, when UNITS=Metric the value reflects kg’s. STAR TRAC FITNESS 2 of 3 637-1374 Rev: A...
Page 3 This is a test used to verify that the fan is working. CSAFE TEST This is a test used to verify that the CSAFE option is working. MEASUREMENTS This is a test used to see the actual voltage of the battery. STAR TRAC FITNESS 3 of 3 637-1374 Rev: A...