Table of Contents
Advertisement
2. Location & Positioning
Introduction
Congratulations on purchasing an EIB650i Series Alarm. You can easily install
these Smoke Alarms throughout the property on escape routes, on each storey, in
corridors & in closed rooms to give warning of fire.
The EIB650iC can be interconnected with hard wiring (or RadioLINK + plug-in
modules) to give the loudest alarm sound level throughout the house.For wireless
interconnection add the RadioLINK + plug-in module (This module must be
purchased separately).
The EIB650iW can be wirelessly interconnected by adding the RadioLINK + plug-in
module (This module must be purchased separately).
Note: Certain Smoke Alarms may be supplied (on request) with the appropriate
RF module fitted.
SMOKE ALARMS - EIB650i Series
Sufficient smoke must enter your Smoke Alarm before it will respond. Your Smoke
Alarm needs to be within 7.5 metres of the fire to respond quickly. Smoke Alarms
also need to be in positions where they can be heard throughout the property, so
they can wake you and your family in time for everyone to escape. A single Smoke
Alarm will give some protection if it is properly installed, but most homes will require
two or more (preferably interconnected) to ensure that a reliable early warning is
given. For recommended protection you should install and interconnect Smoke
Alarms in all rooms where fire is most likely to break out (apart from the kitchen
and bathroom).
6
Advertisement
Table of Contents
