Wan Connection; In Cable Broadband Mode; In 3G Gateway Mode - Zte MF25 User Manual

• Bridge Mode：Connect to Internet by Dial-up program on computer.
• Cable Broadband: Connect to Internet by WAN.
• 3G Gateway: Connect to Internet by (U)SIM.
Please choose the correct operation mode according to your actual network condition. For detailed
information, please contact network operator. Click Apply to finish the setting.

WAN Connection

In Cable Broadband mode

Click WAN Connection, you can configure how to connect to the Internet.
Select PPPoE，input the User Name and Password supplied by the network provider, and select the
Connect mode.
Auto Connect: The router will automatically connect to WAN when it is powered on.
•
• On Demand Connect: The connection will be established when data transmission is required. Router
will disconnect from the Internet if there is no data traffic going through during the Max Idle Time.
Manual Connect: Connect to Internet or disconnect from Internet manually.
•
Click Apply to confirm your configuration, and then the figure will show in the wan connection status.

In 3G Gateway mode

Click WAN Connection, you can configure how to connect to the Internet.
Confidential and Proprietary Information of ZTE CORPORATION 15