Yamaha AN1x Owner's Manual page 41

norm (N orm a l):
L ets yo u play the Vo ice Pattern
o f the currently selected vo ice at its base pitch fro m
any key o n the keybo ard. Yo u can play reg ular
no tes and cho rds acro ss the keybo ard while the
sequence is lo o ping .
Triggers current Voice Pattern
shift& norm (Shift & N orm a l):
the left o f the Split Po int will shift the pitch o f the
Vo ice Pattern acco rding ly (with C2 as the o rig inal
base pitch), and playing keys to the rig ht o f the
Split Po int will play no tes no rmally, witho ut affecting
the sequence. If yo u set the Split Po int to a very
hig h setting (abo ve C6 , fo r example), yo u can shift
the pattern fro m any key, with C2 as the base pitch
o f the pro g rammed pattern.
Base pitch SPLIT POINT
Shifts pattern Normal play
sel& norm (Select & N orm a l):
the left o f the Split Po int will trig g er (" select" ) a
specific User Pattern based o n C# 1 Assig n setting
(C1 will trig g er the Vo ice Pattern fo r the current
vo ice), and playing keys to the rig ht o f the Split
Po int will play no tes no rmally, witho ut affecting the
sequence. Each User Pattern will play at its
pro g rammed pitch. If yo u set the Split Po int to a
very hig h setting (abo ve C6 , fo r example), yo u can
select a different pattern fro m any key.
Playing a key to
Playing a key to
41
User Bank
User Patterns (128)
SPLIT POINT
User Patterns Normal play
Voice Pattern
sel& shift (Select & Shift):
left o f the Split Po int will trig g er (" select" ) a specific
User Pattern based o n C# 1 Assig n setting (C1 will
trig g er the Vo ice Pattern fo r the current vo ice), and
playing keys to the rig ht o f the Split Po int will shift
the pitch o f the selected pattern acco rding ly. C4
always determines the base pitch o f the selected
pattern. Fo r example, if the Split Po int is set to C3 ,
then C1 plays the Vo ice Pattern fo r the selected
vo ice, and 2 3 different User Patterns can be
selected by playing keys C# 1 ~ B2 , and shifted in
pitch by pressing C3 and abo ve, with C4
trig g ering the o rig inal base pitch o f the sequence.
User Bank
User Patterns (128)
SPLIT POINT Base pitch
Shifts pattern notes
User Patterns
Voice Pattern
When " sel& shift" is selected and the Split Point is assigned above C4 , then
sequence pitch can only be shifted above the base pitch.
For more information about Keyboard Mode, see page 8 6 . For information about
assigning the Split Point, see page 7 7 .
Playing a key to the