Suggested Daily Operator Checklist - Presto Lifts Power Stak PPS2200-125AS Installation, Operation And Service Manual

Table of Contents

Advertisement

CHARGE CONDITION/BATTERY CHECK LIST
1. Check Battery Discharge Indicator (Fuel Gage and Hour Meter) – Be sure unit is
showing proper Charge Level before operating unit
2. Check to be sure Charging Cord is Unplugged and properly stowed before operat-
ing unit
3. Inspect Battery Wire Connections – All connections should be tight with No Corro-
sion (white powder) showing at the Battery Terminals
4. Inspect Battery Case – There should be no cracks or visible damage to the Battery
Case
WALK AROUND INSPECTION
1. Check general condition of Stacker (loose or broken parts, oil, dangling wires, dents,
cracked covers etc.)
2. Check metal frame, mast, carriage and font load supports for cracked welds, worn or
flat rollers, loose or disconnected chains, loose pins, missing snap rings, and loose or
missing hardware – bolts, nuts washers etc.
3. Check for evidence of hydraulic leaks
4. Make sure all precautionary labeling is in place and legible
FUNCTIONAL INSPECTION
1. Check Drive – Forward and Reverse Function
2. Check Lift – Up and Down Function
3. Check Function for Belly Button Reverse
4. Check Horn Function
5. Check Brake Function
OPERATOR ID
DO NOT USE OR OPERATE STACKER IF ANY FUNCTION IS NOT
OPERATING PROPERLY OR IF STACKER APPEARS UNSAFE IN ANYWAY
REPORT CONCERNS TO SUPERVISOR IMMEDIATELY!
PRESTO OWNER'S MANUAL
DAILY OPERATOR CHECK LIST
DATE
Page 12
POWER STAK

Advertisement

Table of Contents
loading

Table of Contents