Table of Contents
Advertisement
Options (cont'd)
KIT: MINI BOX BLADE W/SOLID
BLADE
The Mini Box Blade w/Solid Blade kit attaches to the Finish
Rake and is used to move material from high spots and fill in
low spots.
To attach the Min Box Blade to the Rascal, Unscrew and
remove the two wing nuts and remove the two T-clamp
plates (Fig 43).
Slide the Mini Box Blade assembly under the Finish rake so
that the bolts the wing nut threads onto is in the second
comb slot from the end of the comb (Fig 44 and 45).
Lower the unit onto the Mini Box Blade assembly by
cranking the front wheel jack counterclockwise (Fig 46).
Replace T-Clamp plates and tighten wing nuts back onto
both bolts (Fig 47).
Use the closed end of a box wrench large enough to fit over
one wing of the wing nut to use as leverage to tighten the
wing nut tighter (Fig 48).
The unit is now ready to use as a mini box blade. The End
plates (Fig 49) keep the material within the blade area to
help move the material from high spots and fill in low spots.
Remove wing nut
and T-Clamp plate
from both ends.
Fig 43.
Fig 44.
Slide Mini Box Blade
assembly under Finish
Rake so that the bolts
that T-Clamp plate and
wing nut go onto slides
in second slot form
comb end on both ends.
Fig 45.
Visit: www.abisupport.com
Crank wheel jack
counterclockwise
to lower finish rake
onto Mini Box Blade
assembly.
Fig 46.
Replace T-Clamp plates
and tighten wing nuts
back onto both bolts.
Fig 47.
Use the closed end
of a box wrench large
enough to fit over one
wing of the wing nut
to use as leverage to
tighten the wing nut
tighter.
Fig 48.
The End plates keep
the material within
the blade area to help
move the material
from high spots and
fill in low spots.
Fig 49.
32
KIT: MINI BOX BLADE W/SOLID BLADE:
4.5 - 10-99027
5.5 - 10-99031
6.5 - 10-99033
7.5 - 10-99035
ITEM
PART #
1
10-90132
ASM: HARDWARE KIT AND ENDS: 4.5
1
10-90343
ASM: HARDWARE KIT AND ENDS: 5.5
1
10-90134
ASM: HARDWARE KIT AND ENDS: 6.5
1
10-90135
ASM: HARDWARE KIT AND ENDS: 7.5
2
10-90140
KIT: STRAIGHT BLADE: 4.5
2
10-90337
KIT: STRAIGHT BLADE: 5.5
2
10-90142
KIT: STRAIGHT BLADE: 6.5
2
10-90143
KIT: STRAIGHT BLADE: 7.5
KIT: SOLID STRAIGHT BLADE:
4.5 - 10-90140
5.5 - 10-90337
6.5 - 10-90142
7.5 - 10-90143
2
ITEM
PART #
1
10-30917
PLATE: 26" SOLID BLADE: FINISH BLADE: 4.5
1
10-30870
PLATE: 32" SOLID BLADE: FINISH BLADE: 5.5/6.5/7.5
2
10-30906
ANGLE: GRADE BLADE FRM: 4.5
2
10-30907
ANGLE: GRADE BLADE FRM: 5.5
2
10-30908
ANGLE: GRADE BLADE FRM: 6.5
2
10-30909
ANGLE: GRADE BLADE FRM: 7.5
3
10-30916
PLATE: 12" SOLID BLADE: FINISH BLADE: 6.5/7.5
Email: support@abiattachments.com
DESCRIPTION
3
1
DESCRIPTION
Call Toll Free: 877-788-7253
33
1
2
1
Advertisement
Table of Contents
