Table of Contents
Advertisement
Replacement Parts (cont'd)
Profile Blade
Profile Blades should be replaced when the edge of the blade has worn down to the weld on the angled shanks.
Visit: www.abisupport.com
22
Options
10-90261 KIT: RAIL BLADE RIGHT
2
13
11
3
4
1
5
14
12
1
5
10
6
7
ITEM
PART #
1
10-20128
5/16 SAE WASHER ZNC
2
10-20164
HX HD BOLT:1/2-13 1.5":ZINC GR5
3
10-20175
HX HD BOLT:1/4-20 1":ZINC GR5
4
10-20194
FLT WSHR:1/2 SAE: CL ZINC
5
10-20196
FLT WSHR:1/4 SAE:CL ZINC
6
10-20202
NYLOCK NUT:5/16-18:ZINC GR 5
7
10-20208
NYLOCK NUT:1/4-20:ZINC GR 5
8
10-20230
HITCH PIN:1/2" X 5":ZINC
9
10-20232
LYNCH PIN:1/4"X1.25":ZINC
10
10-20325
ASLN NUT:1/2-13:ZINC GR 5
11
10-20368
HX HD BOLT:5/16-18 2.50":ZINC GR5
12
10-40300
WLDMT: RAIL BLADE RIGHT: RASCAL
13
10-40304
WLDMT: RAIL BLADE ARM X BRACE RIGHT: RASCAL
14
10-60069
WHEEL: RAIL BLADE: TR3E RASCAL
Email: support@abiattachments.com
8
9
The rail blade attaches to the frame with a large
pin (Item 8). The shovel cuts into the built up
material along arena walls and rails and pulls it
away, saving the user time and effort.
To use the rail blade, pin the scarifiers/profile
blades out of play. Use the toplink to adjust the
rail blade angle so it is level with the footing.
rail blade is meant to be used with only the
4
finish rake in play.
This allows it to pull material
in from the edge and then be spread out by the
rake.
DESCRIPTION
Call Toll Free: 877-788-7253
23
The
Advertisement
Table of Contents
