Table of Contents
Advertisement
Parts Description (cont'd)
ASM: PIN ONLY HITCH TUBE
9
ITEM
PART #
1
10-10090
LBL: HAND CRUSH: DECAL
2
10-20138
NUT: 1/2-13 HEX FIN: GR 5 ZINC
3
10-20139
1/2" SPLIT LOCKWASHER: ZINC
4
10-20141
HX HD BOLT: 1/2-13 X 4": ZINC GR5
5
10-20194
FLT WSHR: 1/2 SAE: CL ZINC
6
10-20224
HITCH PIN: 5/8" X 5": ZINC
7
10-20232
LYNCH PIN: 1/4" X 1.25": ZINC
8
10-30048
PLATE: RASCAL PIN HITCH
9
10-50002
TUBE: 2" SQ X .25" WALL: RASCAL TONGUE 30" L
Visit: www.abisupport.com
4
6
1
22
5
7
3
2
DESCRIPTION
20
Replacement Parts
All of the ground engaging components are considered wear
parts and will need to be replaced as they wear out from
use. To reorder, please contact the ABI Support department
at 877-788-7253.
Scarifier Tips
Scarifier Tips should be replaced when the tip is worn up to
where the phone number is on the side of the Scarifier Tip.
Requires (2) ½" wrenches to remove.
Finish Rake
As the teeth of the finish rake wear, angle adjustment of the rake is required to maintain a nice finish of the material. If the angle
of the finish rake no longer provides the required finish due to excessive rake wear, replacement is required.
Email: support@abiattachments.com
Replace scarifier tip when
approximately worn up to phone
number on side of tip.
Call Toll Free: 877-788-7253
21
Advertisement
Table of Contents
