Set Up The Nvr On The Monitor; General; Dst - Reolink RLN8-410 User Manual

Reolink PoE NVR

Set up the NVR on the Monitor

Please power on the NVR and connect it to a monitor by VGA or HDMI cable. After
the NVR is powered on, wait a few seconds it'll show a setup wizard on the monitor.
Follow the setup wizard to set up the NVR system.
1. General: Set up the NVR Language, Screen Resolution, Date Format and Time
Format. Click Next.
2. DST: Set up the System Time, Time Zone and choose if to enable DST (Daylight
Saving Time). Click Next.
User Manual 7