Incorrect Power Supply For The Nvr - Reolink RLN8-410 User Manual
Poe nvr
Hide thumbs
Also See for RLN8-410:
- User manual ,
- Operational instruction (24 pages) ,
- Quick start manual (22 pages)
Table of Contents
Advertisement
Reolink PoE NVR
Cause 3. Incorrect power supply for the NVR.
Solution:
(1) It might be the problem of the NVR's power adapter. Please try again with a
different power outlet and power adapter.
Note: For the 8 channel PoE NVR the power adapter is 48V 1.87A. And for the 16 channel PoE
NVR, it's 48V 2.5A.
(2) If you have a 12V DC adapter on hand, you may use the adapter to power the
camera and connect the camera directly to the router. Please check again whether
the camera displays video loss on your NVR.
User Manual
53
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RLN8-410 and is the answer not in the manual?
Questions and answers
как разблокировать экран нажал нечаянно блокировку,а пароль не помню.
If the password for the Reolink RLN8-410 NVR is forgotten, follow these steps to reset it:
1. Go to Menu -> System -> Maintenance and restore all settings.
2. If this does not work, contact the Reolink Support Team for further assistance.
Ensure to write down and store the new password in a secure place after resetting it.
This answer is automatically generated
Видеорегистратор rln8-410 и смартфон работают в приложении reolink только по сети Wi-Fi моего роултора. Я не могу подключиться к регистратору из дома с обычной мобильной сети.