Server Address; Username - Reolink RLN8-410 User Manual

Reolink PoE NVR
Server Address: Enter the domain name or IP address of your FTP server.
Port: Enter the port of your FTP server. The default port is 21.
Username: Enter the username of the FTP server, please make sure to use a user
account with read & write access to the FTP server.
Password: Enter the password of your FTP server user account.
Remote Path: Enter the path on the FTP server where you want the NVR to upload
videos or images. Please use a path that already exist.
File Size: Set the maximum size of the file from 10~1024MB.
Subfolder by Date: Enable this option, it'll upload the video and images to
different folders according to the date.
Content: Choose from Clear, Fluent, Standard or Image Only. Clear, fluent and
standard modes refer to the quality of the video.
Transmission Mode: Choose from Auto, PORT or PASV. It's suggested to keep it as
Auto.
Postpone: Set the length of the recordings uploaded to the FTP server. Choose
from 15 Secs, 30 Secs, 1 Min, 5 Mins, 10 Mins and 30 Mins.
After finishing the settings, please click Apply to save the settings. Click Test If
Setup Succeeded to test if the FTP settings are successful.
User Manual 24