System Management; General - Reolink RLN8-410 User Manual
Poe nvr
Hide thumbs
Also See for RLN8-410:
- User manual ,
- Operational instruction (24 pages) ,
- Quick start manual (22 pages)
Table of Contents
Advertisement
Reolink PoE NVR
8. System Management
General
At System > General page, you can set up the settings below.
Device Name: Set a name for the NVR.
Screen Resolution: Set a display resolution on the NVR monitor.
Scrollview Time: Set a time for the scrollview. For example, set it as 5 sec, then it'll
automatically switch to the next screen of the camera's live image after every 5
seconds.
Auto Lock Time: Set the time for locking the screen automatically, choose the
option from 1 min, 5 min, 10 min or None. Choose None, the NVR will not
automatically lock the screen. Check the option "Require account and password
verification to unlock screen", then it'll ask for the NVR password at the set time
to unlock the screen.
User Manual
38
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RLN8-410 and is the answer not in the manual?
Questions and answers
как разблокировать экран нажал нечаянно блокировку,а пароль не помню.
If the password for the Reolink RLN8-410 NVR is forgotten, follow these steps to reset it:
1. Go to Menu -> System -> Maintenance and restore all settings.
2. If this does not work, contact the Reolink Support Team for further assistance.
Ensure to write down and store the new password in a secure place after resetting it.
This answer is automatically generated
Видеорегистратор rln8-410 и смартфон работают в приложении reolink только по сети Wi-Fi моего роултора. Я не могу подключиться к регистратору из дома с обычной мобильной сети.