Set Up Motion Recording - Reolink RLN8-410 User Manual
Poe nvr
Hide thumbs
Also See for RLN8-410:
- User manual ,
- Operational instruction (24 pages) ,
- Quick start manual (22 pages)
Table of Contents
Advertisement
Reolink PoE NVR
Set up Motion Recording
Please set up the motion detection first, then go to Surveillance > Record to
enable the motion recording.
Click Settings under Record option.
Enable Overwrite, it'll automatically overwrite the previous recordings when the
HDD is full. Choose if to enable Start to record before a motion event is detected
according to your need.
Set the Extended recording time after a motion event ends from 1 min, 2 min, 5
min, or 10 min.
Set the Pack Duration from 30 min, 45 min, or 60 min. The package duration is the
maximum lengthen of a recording file.
User Manual
15
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RLN8-410 and is the answer not in the manual?
Questions and answers
как разблокировать экран нажал нечаянно блокировку,а пароль не помню.
If the password for the Reolink RLN8-410 NVR is forgotten, follow these steps to reset it:
1. Go to Menu -> System -> Maintenance and restore all settings.
2. If this does not work, contact the Reolink Support Team for further assistance.
Ensure to write down and store the new password in a secure place after resetting it.
This answer is automatically generated
Видеорегистратор rln8-410 и смартфон работают в приложении reolink только по сети Wi-Fi моего роултора. Я не могу подключиться к регистратору из дома с обычной мобильной сети.