Camera Settings; Stream; Display - Reolink RLN8-410 User Manual
Poe nvr
Hide thumbs
Also See for RLN8-410:
- User manual ,
- Operational instruction (24 pages) ,
- Quick start manual (22 pages)
Table of Contents
Advertisement
Reolink PoE NVR
You can set to require a password when unlock the screen to protect the NVR
system. Or you can set the NVR to automatically lock the screen and then requires
a password to unlock. It can be set up at NVR Settings > System > General page.
Camera Settings
Stream
Go to Settings > Camera > Stream, here you can change the resolution, frame rate
and bit rate of the camera. Set up a higher resolution provides a better image
quality, but also requires a much higher network bandwidth and uses up more
storage space while recording.
Display
Go to Settings > Camera > Display, here you can set up the Camera Name, Time
Stamp, Watermark, Flip and Mirror etc.
Disable Preview: Turn on or off live view of the camera.
Camera Name: Set a name for the camera.
Time Stamp: Set the position of the Time Stamp, you can choose from Top Left,
Top Right, Bottom Left, and Bottom Right.
Watermark: Turn on or off the Reolink Logo on the live view.
Flip Display: Turn the camera's image upside down when enable this option.
User Manual
7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RLN8-410 and is the answer not in the manual?
Questions and answers
как разблокировать экран нажал нечаянно блокировку,а пароль не помню.
If the password for the Reolink RLN8-410 NVR is forgotten, follow these steps to reset it:
1. Go to Menu -> System -> Maintenance and restore all settings.
2. If this does not work, contact the Reolink Support Team for further assistance.
Ensure to write down and store the new password in a secure place after resetting it.
This answer is automatically generated
Видеорегистратор rln8-410 и смартфон работают в приложении reolink только по сети Wi-Fi моего роултора. Я не могу подключиться к регистратору из дома с обычной мобильной сети.