Phone Settings; Adjust Audio Volume; Set Ring Tone Volume And Type; Adjust Lcd Energy Saving - Fanvil X2C User Manual

7 7

Phone Settings

7.1

Adjust Audio Volume

When the device is in the default standby mode

Set the volume mode in volume select key. (Ringtone size, headphone volume and headphone MIC
gain)

Set the volume in Lower volume and Increase volume.
7.2

Set Ring Tone Volume and Type

When the device is in the default standby mode

Press soft-button [Menu] till you find the [Settings] item.

Enter [Settings] item till you find the [Basic Settings] item.

Enter [Basic Settings] item till you find [Ring Settings] item.

Enter [Ring Settings] item and you will find [Ring Volume] and [Ring Type] item.
 Enter [Ring Volume] item and you find [Headset Volume] and [Handsfree Volume] item.
 Enter [Headset Volume] or [Handsfree Volume] item, press left / right navigation keys to adjust
the ring volume.
 Save the adjustment by pressing [save] button when done.
 Enter [Ring Type] item, press left / right navigation keys to change the ring type.
 Save the adjustment by pressing [save] button when done.
7.3

Adjust LCD Energy Saving

When the device is in the default standby mode.

Press soft-button [Menu] till you find the [Settings] item.

Enter [Settings] item till you find the [Basic Settings] item.

Enter [Basic Settings] item till you find [Screen Settings] item.

Enter [Screen Settings] item till you find [Energysaving] item.

Enter [Energysaving] item, press Left / Right navigation keys to adjust the LCD Energysaving mode.

If select 'Enabled', browse the setting parameters with up/down navigation keys and enter required
information. When done, press [Save] / [OK] button to save the changes.

The default Energysaving time is 30 seconds.
34 / 64