Error Failure Display - Belling BCT90INTP Instruction Manual

ERROR FAILURE DISPLAY

If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem
E4/E5
E7/E8
E2/E3
E6/E9
Note: The above is a summary of the most common failures. DO NOT disassemble
the unit by yourself to avoid any dangers and damages to the induction cooktop.
Possible causes
Temperature sensor failure
Temperature sensor of the IGBT
failure.
Abnormal supply voltage
Bad induction hob heat radiation
28
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power
supply is normal. Power on
after the power supply is
normal.
Please restart after the
induction hob cools down.