Finished Cooking; Boost Function - Belling BCT90INTP Instruction Manual

OPERATION OPERATION
When you have finished cooking
1. Select the heating zone that you wish to switch off
2. Turn the cooking zone off by gently touching the
SmartWheel control in an anti-clockwise direction
until the display shows "0".
3. Turn the whole cooktop off by touching the
ON/OFF key.
WARNING: Beware of hot surfaces
"H" will show which means cooking zone is too hot to touch. It will
disappear when the surface has cooled down to a safe temperature.
It can also be used as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
Using Boost function
Activate the boost function
1. Touch the heating zone selection key for the zone that you
wish to use the Boost function. Once pressed the key will
flash indicating that the power level setting can be adjusted.
2. Gently touch the SmartWheel control in a clockwise direction
until the display shows "P". P means the zone is in
Boost mode.
Note: If the zones have been set into a Flexi-Zone the Boost function can
still be used.
13