Using The Timer - Belling BCT90INTP Instruction Manual

OPERATION

Using the Timer

You can use the timer in two different ways:
• You can use it as a minute minder. The minute minder works as a standard timer
and can be used independently of any cooking zone.
• You can use it as cut-off timer. The cut-off timer will turn off one or more cooking
zones when the timer finishes.
Tip: You can set the timer up to 10 hours.
Using the timer as a minute minder
Make sure the cooktop is turned on, and zone selection key is not activated (zone
indication "-" is not blinking).
Note: you can set minute minder before or after cooking zone power
setting finished.
1. Touch timer key, "-0:00+"will show in the timer display and will blink at the
same time.
2. Set the time by touching the "+" "-"key of the timer
a: Touch the "+" "-" key of the timer once to
decrease or increase by 1 minute.
b: By touching and holding your finger on the "+" "-" the
time will increase or decrease in 10 minute increments.
3. When the time is set, it will begin to count down immediately.
The display will show the remaining time.
5. Timer will sound for 30 seconds and the timer indicator shows
"---" when the set time has finished.
21