Table of Contents
Advertisement
Mounting the VS-510N on the included stand:
You can mount the VS-510N on the included stand in the same way you would mount it on your camera. This
allows you to set the flash up on a flat surface, or to attach it to a tripod head, light stand, or clamp that has a
compatible ¼-20 screw mount.
Turning on the Flash and Firing a Test
To turn the flash on, simply slide the power switch to the On position.
When the flash is ready to fire, the Ready light will glow red. If the flash is mounted on your camera, a flash
icon will also appear in the camera's viewfinder.
To fire a test flash, press the Ready light / Test button.
|
16
Turning on the Flash and Firing a Test
Advertisement
Table of Contents
